• What is the working principle of Jiangmen flushing tank?

    Principle of flushing water tank working principle: the water level in the water tank is controlled by the floating ball, which means that the floating ball will stop water supply as the water level in the water tank rises, and then it will enter the water; when someone flushes, press the button - pull out the rubber plug at the bottom of the water tank, and the water in the tank will flush out immediately, and the rubber plug will be flushed back to the drain outlet at the bottom of the water tank to block the drain outlet, At the same time, the make-up water enters into the high water level and works again and again. First open the upper cover of the water tank, and then you can see a floating ball. The floating ball has a connecting rod connected with the water inlet {it acts as a stop valve, if the water storage capacity of the water tank needs to be increased


  • What are the flushing methods of urinal?

    Urinal is a toilet for men. It is usually used less in our private family than in some public places. At present, there are few kinds of urinals on the market, but there are still one or two. So today, I will take you to have a look at the classification and purchasing skills of urinals. Classification of urinal: siphon urinal can only be classified into two types, namely, flushing type and siphon type. First of all, let's take a look at the principle of siphon urinal. The so-called siphon urinal may not be mentioned. Many people will treat it with mist. Siphon refers to the use of siphon principle


  • What are the purchasing methods of Jiangmen urinal?

    The above we focus on the classification and price of urinal. Many partners who want to buy must be eager to buy it, but before we buy, I still want to introduce its purchasing skills for us, so as not to be satisfied with the urinal we buy. 1) size selection: This is very important about the urinal. In our daily use, the distance from the middle of the water inlet to the finished wall of the urinal with flushing valve should be smaller than 6 mm, and the thickness of any part of the urinal should be deeper than 60 mm


Previous page1Next page Go to page
Navigation Call About Product